The Drive Where Windows Is Installed Is Locked Unlock the Drive and Try Again Windows 81

"The bulldoze where Windows is installed is locked. Unlock the drive and attempt again." is a general issue occurring in Windows 7/8/8.1/10. The problem is acquired when a user tries to install or restore the Windows Operating arrangement from BIOS using a bootable device. When critical files in startup fail to load, the fault is likely to occur in your Windows OS.

Part one. What Crusade the Error of 'The Drive Is Locked'

It is necessarily not a specific reason the errors like "The drive where Windows is installed is locked. Unlock the drive and try once more" occur in windows. Hither is a listing of the possible causes which might bring the issues.

• Master Boot Tape (MBR) in the offset section is damaged.
• Boot Configuration Data (BCD) is decadent.
• Bitlocker boot agent is disrupted.
• Errors in organisation disk.

Function 2. How to Fix the Fault 'The Drive Where Windows Is Installed Is Locked'

• Solution 1. Click 'Abolish' And Follow the On-screen Instruction
• Solution 2. Create A Windows x Bootable Media to Kick Unremarkably
• Solution 3. Run CHKDSK Utility to Troubleshoot Windows 10/8.1/viii Error
• Solution 4. Apply Bootrec to Rebuild the BCD File
• Solution 5. Use SFC Command

Solution 1. Click 'Cancel' And Follow The On-Screen Didactics

The best solution y'all can try on the first run is to try repairing your figurer using built-in windows feature "Repair your Computer." One time y'all get the fault, click on the "cancel" button, and and so follow the instruction to see if it can unlock the hard drive ordinarily.

Solution 2. Create A Windows ten Bootable Media to Boot Normally

Windows tin can crash anytime, and there is always a chance that you are looking for a trustworthy solution. Tenorshare Windows Boot Genius is the right tool to repair crashed MBR, which may eventually solve the issue we are trying to address in this commodity.

• After installation, run the awarding on your device. Insert a wink drive and click on "Burn" in the application. The system will brand your wink drive to a recovery bulldoze.

  
• At present, insert your newly prepared recovery drive to the estimator and press the Function key that directs you to the boot menu. On the kicking pick, select F2 or F12 depending upon your computer brand.

• If you are having "The drive where Windows is installed is locked. Unlock the drive and try again" issue, then it'southward probably happening due to crashed MBR. Follow the wizard located below the screen to narrow downwardly the trouble.

  

Solution 3. Run CHKDSK Utility to Troubleshoot Windows ten/eight.1/8 Error

CHKDSK is a utility control that checks your hard disk integrity. Go through the steps below to solve the issue "The bulldoze where Windows is installed is locked. Unlock the drive and try again."

• Firstly, wink your pen drive or CD/DVD with a boot media using Tenorshare Windows Boot Genius. Restart the computer and go to BIOS for media installation.

• On the Windows Setup, click on "Repair your Computer."

  

• Afterward that, select "Troubleshoot" option so to "Advanced pick." There, select "Command prompt" from the given cake of options.

  

• On the command-line interface, type the following control: "Chkdsk C: /f /x /r". C drive is generally where the OS is installed. Finally, click "Enter" to continue.

Solution 4. Use Bootrec to Rebuild the BCD File

Sometimes broken BCD file tin can crusade the following fault. Hither is how yous can rebuild the BCD file using Bootrec.

• Flash a bulldoze with the help of Tenorshare Windows Kick Genius and insert it to your computer.

• On the Windows setup, go to "Repair your calculator."

• Similarly, go to "Command Prompt" on Advanced Choice.

• On the control-line interface, type the following commands.

  "bootrec /FixMbr", Press Enter

  "bootrec /FixBoot", Printing Enter

  "bootrec /ScanOs", Press Enter

  "bootrec /RebuildBCD", Printing Enter

• Now, remove recovery media.
• Type leave in the control interface and then printing enter.
• Finally, restart the computer to encounter if the problem persists.

Solution 5. Utilize SFC Command

System File Checker, as in SFC, is a utility tool that allows scanning through the damaged files in the Operating Organization and restoring them. Follow the steps to know the verbal method.

• Follow the method from the above section to go to Advanced Options; there select "Command Prompt."

• On the command-line interface, type in the post-obit command: "SFC/scannow". Now, hitting "Enter" to run the control

  
• Once the command runs successfully, restart the reckoner and check if the problem is resolved.

Solution half-dozen. Reset This PC Drive Where Windows Is Installed Is Locked

• Become to "Settings" from the Windows icon.

• On the settings, choose the "Update and Security" tile.

  

• Now, click on "Recovery."

  

• On Reset this PC department, select "Go Started."

• At present, choose an choice to "Remove Everything."

  

• On the generated dialogue box, confirm erasing the drive. Finally, hit "Proceed."

  

FAQ: The Drive Where Windows Is Installed Is Locked Windows 8/8.1/10

1.What drive is Windows installed on?

By default, bulldoze C is where Windows is installed on. However, to verify the drive open the Windows CMD from the start. In the command line interface blazon " diskpart" and enter; "list volume" and enter.

On the far right corner in the "Info" section, look for the drive that says "boot."

2.How exercise I know which drive is my boot drive?

You can look subsequently the kicking drive with disk management. In the start carte, search for "Disk Management or blazon diskmgmt.src in Run. In the disk management, look for the disk that says "Boot," It is your boot drive.

huntingeng.blogspot.com

Source: https://www.tenorshare.com/fix-windows/the-drive-where-windows-is-installed-is-locked.html

Share this post